#23 gauge pinner how to#
#23 gauge pinner professional#

If you were adding a length of molding across a wall of wainscotting, that feature can help speed things up. And the trigger system means you can hold the safety trigger down (for up to about 40 seconds) and keep pressing the firing trigger to set nails in rapid succession. There is virtually no lag time between pulling the trigger and the nail firing out. Once that nitrogen is compressed, energy builds that then drives the nail forward. It drives nails using a canister of nitrogen built into the tool. The Milwaukee is as fast as you'd need it to be. After a dozen nails, it becomes second nature. Pull one trigger, which acts as the safety, and then, while holding it down, pull the second trigger to drive the nail. But with a 23-gauge nailer, the wood is often smaller and pressing down on it might move it out of alignment, which is why Milwaukee opted for a two-trigger system. These tools use that method of pressing the work down because the pieces of wood you’d be working with are generally larger. To fire a nail, the head of the tool would have to be depressed against the work, then you can pull the trigger. Traditionally, all nail guns –pneumatic, fuel cell-powered, and battery-powered – relied on a contact tip to prevent accidents. The first thing you’ll notice is the dual triggers, which act as a safety system. In hand, the tool feels lightweight and very manageable. What Is The Milwaukee 23-Gauge Pin Nailer like to use? A 23-gauge pin is roughly 1/4 of the size of an 18-gauge tool.

#23 gauge pinner how to#

Because the head is so slight, manufacturers of the nails print an arrow on the bonded strips of fasteners indicating how to properly load them into the tool's magazine. The end that drives into the wood has a slight chisel on it, and the other end might be bare or have a slight head on it. 23-gauge nails, when you look at them in a box, are essentially a row of wire strips bonded together. Generally, cordless 23-gauge nailers sink fasteners from 3/8 to 1 3/8-inches long. They all have straight magazines and all fire the same kind of nails, though some opt for an 18-volt battery versus the lighter weight, less powerful 12 volts of the Milwaukee. Unlike other nailer categories, there aren’t too many buying decisions when it comes to cordless 23-gauge nailers. Pneumatic and battery-powered 23-gauge nailers are roughly the same size, though when you add an air hose to pneumatics, that makes them more cumbersome to use. Milwaukee has embraced this fully embraced the cordless revolution and we highly rate their Milwaukee M18 Fuel Cordless 16-gauge Nailer, too. That increases the maneuverability of the tool greatly and cuts down on maintenance, both of the tool itself and the compressor. But over the last few years, the cordless battery revolution has reached pin guns too, severing the compressor cord.

#23 gauge pinner professional#

Traditionally, professional carpenters and woodworkers had to rely on a compressor to drive 23-gauge pin nails. It leaves tiny holes that usually don't require touchups and keep things steady while the glue dries. (Image credit: Milwaukee) Choosing A 23-Gauge nail gunĪ 23-gauge nailer isn’t a must-have for a DIYer, but if you work with pre-finished moldings, cabinets, flooring trim, small pieces of molding, mitered corners and returns, it can be a real time-saver. Unlike 18-gauge and 16-gauge nail guns, where there is a lot of overlap in the tasks they each perform, using a bigger nail when the project calls for a 23-gauge pin can make more work if you split the wood or have to go back and touch it up with filler. Big, fat 15-gauge nail guns are bigger than a dinner plate and will hold up heavy, pre-hung doors whereas a 23-gauge nailer is about 8x7-inches, 3 pounds, and fires fasteners that excel at holding thin pieces of molding. Like all nail guns, the size and shape of the fastener dictate the jobs it's best suited for. When it comes to finished material, like the moldings that accompany kitchen cabinets or pre-finished hardwood flooring, that speeds up installation. That means the hole they leave behind virtually disappears so you won’t have to fill, sand, and finish the wood, which is ideal for pre-finished parts. Called a pin nailer, this class of tools – which can either rely on a compressor a rechargeable battery – fires a thin wire that has no head, or a very slight one. But professional carpenters and woodworkers have been using pneumatic 23-gauge nailers for years. The 23-gauge pin nailer is likely the one nail gun DIYers are unfamiliar with, especially compared to the popularity of 18-gauge tools.